In order to provide comfort of work and sense of safety for the installators, Atlas has developed unique recipe, which
facilitates usage of the modern building materials, enhances its durability and ensures
the quick completion of Customer`s orders.
A new adhesives of the Geoflex family were designed with use of the innovative technology of a siliceous gel and its unique ability for bonding the water. Owing to accumulation of the water, the adhesive ensures high bonding strength and excellent adhesion to the standard substrates as well as the critical ones (e.g. non-permeable or heated over +35°C), regardless of the ambient conditions and a type of installed cladding.
Atlas Geoflex is an adhesive for any type or size of the tiles, including large-sized, over 5 m2 (Atlas Ultra Geoflex)
Consistency adjusted to the needs: no slip on the wall or a full mortar spread underneath the tile on the floor.
For a critical and difficult substrates, among others an old tiles, terrazzo, OSB boards and waterproofing coats.
Atlas Geoflex gel adhesives are characterized by wide range of mix-water ratio. A two different variants of the consistency can be obtained: a plastic consistency with no slip – which simplifies installation of the cladding on the wall from the top towards the bottom, and spreadable one – perfect for installation of tiles (any size or format) on the floor. Filling the area underneath the tile guarantees durability and functionality of surfaces exposed even to the largest exploitation: terraces, balconies, quartz sinters, surfaces with a floor heating. Obtaining full spread underneath the tile does not require using force during the installation.
Modified recipe of the mortars ensures an extended open time, i.e. installation of the cladding is possible even 30 mins after application of the adhesive. Essential parameters: prolonged pot life of the mortar (even up to 4 hours) and adjustability of a fixed tiles (even after 30 minutes). Geoflex adhesive allows for almost unlimited freedom of application and guarantees excellent final result.
The Atlas Geoflex gel technology ensures unique work parameters. The siliceous gel is arising during the mortar preparation. The siliceous gel bonds water in its structure which has an impact on application parameters of the adhesive. The mortar bonds perfectly during mixing with water and obtains a perfect consistency very quickly. The adhesive is sticking to the tools – does not fall from the vertical surfaces during application. Geoflex ensures an effortless movements of the trowel, regardless of the notch size and the thickness of applied adhesive.
Geoflex adhesives are suitable for any structurally sound building substrates, including concrete, walls made of bricks or hollow blocks, plasterboards, OSB boards, or surfaces which are heated and exposed to the thermal tensions. This is a perfect solution for a difficult substrates – terrazzo or an existing ceramic cladding. The Geoflex adhesives can be used to correct irregularities between 2 and 15 mm, the adhesives allow for fixing the cladding and filling the surfaces at once. Grouting can start after 12 hours, regardless of the thickness of an applied adhesive.
The Atlas Gel Technology is applicable even for the extreme weather conditions. Adhesives from the Geoflex family can be applied in temperature up to 35°C. Ability for accumulation of the water by siliceous gel is limiting its evaporation from strongly heated substrates, a water is being used during hydration process of the cement binder. The highest strength parameters can be obtained e.g. during installation of the tiles in a hot days on terraces or balconies. Atlas Ultra Geoflex ensures safety and durability of the installed cladding.
The Atlas is the only manufacturer of a building chemistry which uses packaging made of the plastic bags. So stored cementitious and gypsum products are protected from impact of the atmospheric conditions. Water and dampness have a negative impact on the technical and work parameters, leading to irreversible damage of the product, even before an application of the product. Owing to use of plastic bags, high product quality is guaranteed – regardless of transport and storage conditions (including bulk products). Atlas packages are durable and do not deteriorate when falling from heights.
Highly flexible gel adhesive C2TE (2-15 mm)
Highly flexible gel adhesive C2TE (2-15 mm)
Find here the most important guidelines for installation of this type of the tiles: which products are suitable, how to cut the tiles and what to do to make the results of the work satisfying.Learn more >
Adhesives for tiles on the basis of a white cement still constitutes a small percentage of the adhesives for tiles used in Poland.Learn more >
The family of gel adhesives Atlas Geoflex (Atlas Geoflex, Atlas Ultra Geoflex, Atlas Geoflex White) reigns on a market for over two years.Learn more >
Become an Atlas products tester and share your opinion.
7 out of 10 professionals who took part in a blind test of S1 adhesives, have chosen Atlas Ultra Geoflex among other available products. The group of 10 contractors with a few years of experience in the construction works, who do not use Atlas products on a daily basis took part in this competition. Their job was to evaluate the adhesives of the S1 class in terms of specific parameters:
Preparation of the mortar – dusting, mixing and consistency of mixture with any possible type of water;
Application of the adhesive – convenient spread, distribution and stability of the adhesive;
Flow - which has an impact on comfort of the work;
Convenient spread underneath the tiles - tiles does not collapse under the weights and spread of an adhesive underneath the tile is effortless for the contractor.
After 4-days tests there were no doubts – Atlas Geoflex was chosen by 7 out of 10 installators, who used it with water/dry mix ratio according to their discretion, as well as in accordance to the manufacturer`s guidelines.
|Sample of an adhesive||Average rate by Installators|
|1° Atlas ULTRA Geoflex||4,3|
|2° B sample||4,1|
|3° C sample||3,9|
On a basis of a blind test of the three leading C2TE gel adhesive mortars, the best one was chosen. The first place of a podium was taken by the Atlas Geoflex. A 7 out of 10 professionals has marked it as 4.5 out of 5 while only a three of them have chosen a different product.
The participants were assessing product in terms of following categories:
Preparation of the mortar: dusting, convenience of the mixing and consistency of the adhesive;
Application of the adhesive: formation of a skin on the top of freshly applied adhesive, which defines the time when it keeps its bonding properties;
Flow from the walls even in a case of the tiles bonded facing each other;
Spread underneath the tiles on the floor which has impact on tiles subsiding under the weight.
The contractors valued Atlas Geoflex adhesives, in terms of the best consistency, taken into consideration its density, effortless stirring and high bonding. They have also noticed that the consumption of the Atlas Geoflex is significantly lower than the products of the same class from different manufacturers.
|Sample of an adhesive||Average rate by Installators|
|1° Atlas Geoflex||4,5|
|2° B sample||4,2|
|3° C sample||3,6|
The gel additives based on minerals including montmorillonite constitutes the breakthrough gel technology. Its main attribute is outstanding ability for absorbing the water – 1 g of this material can absorb approx. 5 g of water, owing to its structural arrangement. Montmorillonite contains crystals arranged in a layers. While moistened, water is kept between following layers and forms so called sandwich structure – layers of the crystals and layers of the water are located alternately. Water accumulated in the structure forms the silica gel. Gel reservoir decreases water evaporation during sunny days or its absorption by absorptive or wrongly prepared substrates.
While the temperature is high, water evaporates quickly – it`s a fact, concerning also a batched water contained in the adhesive – if water evaporates, the durability and bonding is decreased. A solution for that problem is to choose the product which has increased water retention. All the products from Geoflex family contain siliceous gel which bonds the water and allows for full cement hydration even in the most difficult weather conditions.
A siliceous gel contained in adhesives from the Geoflex family allows for adjustment of consistency by amount of added mix water (in a range defined by Technical Data Sheet). Allows for adjusting working properties to individual needs related to the application conditions and the Contractor`s preferences. Any adhesive of the Geoflex family can be prepared as a mortar with zero flow – which allows for installation of the cladding from the top without the need to support tiles from the bottom, but also in more spreadable form, which ensures a full support even for the largest formats, without subsiding under a heavy load of the tiles. That capability is a guarantee of safety - reduces the danger of pouring too much water.
Thoroughly selected aggregates and white cement is used for manufacturing of this special adhesive. White cement is manufactured from selected raw materials containing minimum contents of colourful oxides (mainly iron, manganese, titanium and chromium oxides). Its content does not exceed usually 0.3% mass. Another factor is a method of combustion – in order to avoid contamination of cement with ashes from carbon, the heating oil or gas is used as a fuel. Geoflex white is characterized by easy correction just like any other gel adhesives. Rapid growth of strength resulting from content of white cement allows for grouting 12 h after application of adhesive. Gel technology with a wide range of batched water allows for obtaining a full spread underneath the tile and in combination with unified bright colour guarantees no discolouration on stoneware, glass and composite tiles.
Rheology is a branch of science which can be broken down to easiness of mixing and application. Modification of cement and fillers can facilitate mixing of the Geoflex adhesives with water, even with a very short mixing. Obtained consistency seems like lightweight and fluffy. Product sticks perfectly to the tools, does not flow from a vertical surfaces. Adhesive is stable and does not subside even in a thick layer. These are the unique parameters of the Geoflex adhesives.
The adhesives from the Geoflex family can be used in range of thickness from 2 up to 15 mm per layer. It allows for:
All of above can be done with the one product.
A specialist with many years of experience
Atlas Geoflex is an optimal adhesive and is suitable for literally any application, is highly plasticized, furthermore, the application is very convenient.
In construction industry for 18 years, specializing in complex interior finishing
This was my first time of validation of Atlas products. Events like this prove that Atlas values an opinion of the installators, not only the ones who use their products on a daily basis. I chose Atlas Geofles during tests because it was convenient to apply, it shown excellent spread and bonding (it was hard to detach one tile from another). The adhesive is multi-purpose – for floors and walls – and doesn’t have much disadvantages.
Working in the construction industry for many years.
Atlas Geoflex has the most of advantages and has the highest bonding strength – there was a 50 % of adhesive left after tearing off 30 min from fixing the tile. Competitive manufacturers are trying to take pattern but the Geoflex wins this competition.
Specializing in complex interior finishing
Work with Geoflex is the easiest and the achieved results are the best. This is surely my choice.